CLïR 3000 Series High Purity Lab Water System
High-Purity Lab Water
– Up to 4.0 LPM
– 18 MegΩ Water
– Low Operating Costs
This attractive compact unit can be free standing or wall mounted. Resistivity is temperature compensated and continuously monitored on the digital display. Filters are easy to replace and require no tools. High capacity cartridges require less frequent change-outs and lower operating costs.
A variety of options are available including: remote dispensing gun, 0.05 micron hollow fiber UF filter, and combination high-purity/sub-micron cartridge Reverse Osmosis pretreatment systems are also available. Aries also offers a direct feed option for auxiliary equipment.
*Note: Reported flow rate is typical but can vary depending on supply pressure and system options.
FEATURES
- 4.0 LITERS PER MINUTE OF 18 MEGOHM WATER
- EASY CARTRIDGE REPLACEMENT
- LOW OPERATING COSTS
- MICROPROCESSOR CONTROLLED
- FULL RECIRCULATING WATER
- COMPACT DESIGN
INFLUENT QUALITY | |
Source | Reverse Osmosis, DI, or Distillation |
Purity | < 20 µS/cm |
Filtration | 0.2 µm |
Free Chlorine | < 0.05 ppm |
Silica | < 2 ppm |
TOC | < 50 ppb |
EFFLUENT QUALITY (STANDARD SYSTEM) | |
Purity | >18 Megohm-cm |
Microorganisms | < 10 CFU / 1000 ml |
Chlorine | < 1ppb |
Sodium | < 1ppb |
With 0.05 micron UFEndotoxin | < 0.03 EU |
General specification | |
Dimensions (HxWxD) | 61 cm x 59 cm x 22 cm |
Weight | 32 lbs dry / 38 lbs operating (14.5 kg dry / 17.3 kg operating) |
Connections | Inlet 3/8” Tube Outlet 1/4” FNPT |
Power Requirements | 120 VAC/ 60 Hz @ 1.0 amp |
Pressure | 90 PSIG Maximum 20 PSIG Minimum |
Temperature (Max.) | 30˚C |
Flow Rate (Typical) | 4.0 lpm (1.1 GPM) 2.0 lpm (0.53 GPM)* |
Outer Shell | Powder Coated Steel |
*w/ capsule filter