CLïR 5200 Ultra High-Purity Water System

Ultra High-Purity Lab Water with UV Oxidation Technology for use with:

– High Performance Liquid Chromatography (HPLC)
– Gas Chromatography Mass Spectrometry (GC/MS)
– Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
– Analytic Chemistry / Trace Organics

Designed specifically for trace organics and analytic chemistry applications requiring low organics and bacteria, the CLïR 5200 delivers 2.5 LPM of Type I, 18.2 Megohm water quality on demand. The water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, and ultraviolet light for bacteria sterilization and TOC reduction. As the water exits the system, a final filter removes particulates and bacteria to reach Type I water specifications.

CLïR 5200 uses a dual wave length technology to reduce organics and sterilize bacteria at the same time. Certain applications like HPLC and LC, require ultrapure water with TOC levels less than 5 ppb. The water is typically used in the preparation of mobile phase preparation, creating blanks, and sample dilution. For trace metals analysis, ICP-OES / ICP-MS require the organic and ionic purity for their dilution and dissolution processes.

Feature

  • 2.5 LPM* OF 18 MEGOHM TYPE 1 REAGENT WATER ON DEMAND
  • INTUITIVE, USER FRIENDLY TOUCH-SCREEN INTERFACE
  • REAL TIME QUALITY MONITORING WITH LEAK DETECTION
  • COMPACT DESIGN WITH REMOTE DISPENSE OPTION
  • QUICK CHANGE, NO TOOLS CARTRIDGE DESIGN
  • LARGE CAPACITY, LOW COST CONSUMABLES CARTRIDGES
  • GENUINE RESINTECH MEDIA

*Note: Reported flow rate is typical but can vary depending on supply pressure and system options

Model5100520053005400
ApplicationsBasic Chemistry,
Academic, IC Buffers
HPLC, GC/MS,
Trace Organics
Life Science, Cell
Culture, Microbiology
DNA Sequencing,
PCR, Electrophoresis
Conditioning Cartridge
Polishing Cartridge
UV Oxidation
Ultrafiltration
0.2 micron
Resistivity18.2 MΩ-cm18.2 MΩ-cm18.2 MΩ-cm18.2 MΩ-cm
Bacteria< 1 cfu/ml< 1 cfu/ml< 1 cfu/ml< 1 cfu/ml
Endotoxin**<0.005 EU/ml<0.005 EU/ml
Particulates< 0.2 μm filtration< 0.2 μm filtration< 0.05 μm filtration< 0.05 μm filtration
TOC< 15 ppb< 5 ppb< 15 ppb< 5 ppb
RNase< 0.01 ng/ml< 0.01 ng/ml
DNase< 4 pg/μl< 4 pg/μl
Dimensions (H x W x D)54.8cm x 37cm x 36.5cm
Weight22.7 kg dry / 25 kg operating
Inlet Connection3/8” O.D. Tubing
(9.53 mm O.D. Tubing)
Power Requirements120 VAC/ 60 Hz @ 1.0 amp
Pressure90 PSIG Max. / 20 PSIG Min
Temperature (Max.)100˚F / 30˚C
Flow Rate (Typical)0.67 Gallons Per Minute
2.5 Liters Per Minute
< 2.0 LPM with Ultrafilter &
Endotoxin filter installed

* Performance based upon RO / DI or Distillation Feed (< 20 uS/cm, < 50 ppb of TOC, 0.2 micron filtration)
** Includes Endotoxin Removal Capsule Filter