Gemini Series (GMS)
Ultra High-Purity Lab Water
– Multi-pass UV Sterilization
– 18.2 MegΩ Water
– Up to 3.7 LPM
The GEMINI Ultra High Purity Water System provides 3.7 liters per minute of 18.2 megohm, 0.2 micron filtered water.* The Multi-Pass Ultraviolet system irradiates the water at three separate passes in the recirculation loop. The dispensing port is continuously exposed to UV for complete sterility at the outlet. Water quality meets or exceeds ASTM, CAP and NCCLS Type 1 specifications.
Controls include PLC and a 3.5” high resolution HMI display. Touch panel screen provides easy interface for dispensing and programming up to four batches. Resistivity is clearly displayed with system operation status. Display turns red during alarm condition below resistivity set point. Hibernation mode runs the pump intermittently to keep the system ultrapure. The integral basin accommodates filling large containers and controls drips and spills. A variety of options are available such as a dispensing gun, ultrafiltration, wall mounting hardware and a sanitization kit. RO pretreatment systems are also available.
*Note: Reported flow rate is typical but can vary depending on supply pressure and system options.
FEATURES
- 3.7 LITERS PER MINUTE OF 18 MEGOHM WATER
- AUTOMATIC PROGRAMMABLE FILLING
- MULTI-PASS UV STERILIZATION
- MICROPROCESSOR CONTROLLED
- MULTI-PASS UV STERILIZATION
- ULTRAPURE WATER
- ISO 9001 : 2008 CERTIFIED
INFLUENT QUALITY | |
Source | Reverse Osmosis, DI, or Distillation |
Purity | < 20 µS/cm |
Filtration | 0.2 µm |
Free Chlorine | < 0.05 ppm |
Silica | < 2 ppm |
TOC | < 50 ppb |
EFFLUENT QUALITY (STANDARD SYSTEM) | |
Purity | >18 Megohm-cm |
Microorganisms | < 10 CFU / 1000 ml |
Chlorine | < 1ppb |
Sodium | < 1ppb |
With 0.05 micron UFEndotoxin | < 0.03 EU |
With Combination UV / TOC DestructTOC | < 3 ppb |
General specification | |
Dimensions(HxWxD) | 61 cm x 46 cm x 47 cm |
Weight | 42 lbs. dry / 47 lbs operating (22.7 kg dry / 25 kg operating) |
Inlet Connection | 3/8″ O.D. Tubing .375 mm O.D. Tubing |
Power Requirements | 120 VAC/ 60 Hz @ 1.0 amp |
Pressure | 90 PSIG Maximum 20 PSIG Minimum |
Temperature (Max.) | 30˚C |
Flow Rate (Typical) | 1.0 Gallons Per Minute 3.7 Liters Per Minute |
Outer Shell | Polypropylene 316 Stainless Steel |